80kg/M3 160kg/M3 PP Honeycomb Core for Yacht Camper Truck Body Panel

Product Description

1. PP honeycomb core is a new construction material, which is made of PP based on honeycomb bionic principles. Compared with traditional materials, it has these remarkable advantages like light-weight, high compressive strength, environmentally friendly, waterproof, moisture-proof and corrosion resistant etc. Moreover, honeycomb can be attached with various of face materials (such as FRP, wood grain sheet, aluminum sheet, stainless steel sheet, marble sheet, rubber sheet etc. ). Therefore, it can extensively replace traditional materials, and it can be widely used in these areas like van, high-speed train, aerospace, yachting, home furnishing and mobile architecture etc. 
Specification

Items	8	10	12
Color	white	white	white
Cell core diameter(mm)	8	10	12
Density(kg/m3)	80	75	70
Compressive strength(Mpa)	1.66	1.58	1.47
Modulus of compressive(Mpa)	45.7	41.2	38.9
Shear Strength(Mpa)	0.5	0.45	0.4
Effective Temperature(°C)	-40----+80	-40----+80	-40----+80
Thermal insulation U-Value(w/m2k)	2.2	2.2	2.3

Air filtration and air purification
With its round cell structure, honeycomb has excellent characteristic of air diversion, waterproof and humidity resistance. As carrier of active carbonate, it exerts perfect performance in air purification.
With good air diversion property, Tubus honeycomb can reduce airflow resistance and noise.

PP Features :
Cost-effective solution
Light weight& Stiffness
High strength-to-weight ratio
Moisture , chemical and corrosion resistant
Shock resistant
Energy absorbing
Thermal and acoustic insulator

Cellcore diameter: φ4~12mm
Color:white
Volume weight: 80-300kg/m³
Effective tempreture: -40ºC~+80ºC
Thermal conductivity: 0.102
Normal size:2440*1220mm


2. Fiberglass reinforcement Thermoplastic PP Honeycomb

The glass fiber reinforced polypropylene honeycomb composite board is a honeycomb structure material, made of PP flow film on the upper and lower surfaces, glass fiber PP composite yarn fabric on the middle two layers, and PP core material, which is directly fused by heating the composite yarn fabric.

It is one of the lightest and strongest composite sandwich panels produced for industries.This innovative sandwich panel is thermally fused with polypropylene honeycomb core and fiberglass reinforced polypropylene skin.

The core material gives high resistance due to its honeycomb structure, and the super strong fiberglass-reinforced skin materials provide high stiffness and an extremely good impact resistance of the panel surface.
The thermally fused connection between the honeycomb core and the skins leads to an indivisible connection and makes the panel much lighter and ecofriendly. And the delamination of the skin is almost impossible which distinguishes it from other traditionally glued or laminated panel systems.

Product advantages:

·Light weight
          Density is relatively small and weight is very light ,due to the special honeycomb structure;
          The truck body made of PP honeycomb panel can greatly improve the truck load to weight ratio.
·High strength
          It is resistant to impact, rigid and flexible, and can resist physical stress impact and damage.
·Easy to assemble
          Assembly is very convenient, low cost, can be assembled with screws, blind rivets, can also be bonded or hot-melt welding.
·Waterproof and moisture-proof
         This is what distinguishes our PP honeycomb panel with wood.
         It has good sealing performance, no water seepage, no water absorption even if the surface is damaged.
·Strong weather resistance
         It is a glass fiber reinforced thermoplastic material with a wide temperature range from - 40 ºC to + 80 ºC
·Strong chemical resistance

Specification:

 

 

Thickness	10mm-75mm (0.4 inch -2.95 inch)
Thickness Tolerance	±0.5mm (±0.02 inch)
Standard Width	2160/2300/2500/2750mm (7.08/7.55/8.20/9.02 Feet)
Length	16000mm
Surface Treatment	Anti UV Painting
Paint Color	Customizable (Color Code Required)
Core Density	80kgs/m³ (100kgs & 120kgs are optional )
Skin Density	980g/m2(1500g/m2 is optional)
Transparency	Translucent/Opaque

 

Regular size	length	2000-16000mm	size tolerance	±2/4/8mm
	Width	2000-2750mm	size tolerance	±2mm
	Thickness	25-30mm	size tolerance	±0.3mm
Customized as customer request (≥500m2)	length	500-16000mm	size tolerance	±2/4/8mm
	Width	500-2750mm	size tolerance	±2mm
	Thickness	10-100mm	size tolerance	±0.5mm
Flatness		±4mm/m
Color		White / Black	Single side
Surface treatment(≥500m2)		As request
		Surface anti - slip, anti - UV treatment, abrasive treatment, fire treatment, coloring treatment, etc

Application: partition/wall
 

Advantages: waterproof and moisture-proof, no water seepage, no water leakage, easy to assemble, corrosion resistance

FAQs

1. What is your terms of packing?
    Generally, we pack our goods in carton with pallet

2. What is your tems of payment?
    T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

3. What is your terms of delivery?
    EXW, FOB, CFR, CIF,L/C at sight

4. How about your delivery time?
    Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

5. Can you produce according to the samples?
    Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

6. What is your sample policy?
    We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

7. Do you test all your good before delivery?
    Yes, we have 100% test before delivery
 

 

          24 Hours Services          

Choose us, you will get the key of market!
Contact us, we will use the professional knowledge serve you!
Wish we can create the great future together!