80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion

QINGDAO HONTED BUILDING MATERIALS CO.,LTD
  • Audited Supplier
  • 7 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • High Performance Weight Ratio: Excellent specific stiffness and strength for lightweight composite structures.
  • Low Water Absorption: Water absorption rate ranges from 0.12% to 0.25% for superior dimensional stability.
  • Customizable Density: Density options available from 48 to 250 kg/m3 to meet specific project needs.
  • Customizable Dimensions: Standard sizes include 2160x1000mm and 1080x1000mm with custom options.
  • Customizable Thickness: Thickness ranges from 3mm to 60mm to suit various molding requirements.
  • Excellent Fatigue Resistance: Provides high impact resistance and durability for long-term performance.
  • Versatile Molding Compatibility: Suitable for vacuum infusion, spray up, hand lay-up, and vacuum bagging.
  • Advanced Post-Processing: Offers cutting, grooving, perforation, and thermoforming for optimized resin flow.

Product Images of 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion

80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion pictures & photos
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
  • 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
    80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion

Find Similar Products

Product Description

Strucell P is a cross-linked, closed cell PVC structural foam has good specific stiffness, specific strength. Compression, tensile, shear and bending strengths are excellent. PVC foam core also has good dimensional stability and easy to process, suitable for a variety of processes. It is an ideal core material for lightweight & high-strength composite sandwich structures. 

It provides excellent fatigue resistance, impact resistance and very low water absorption. Heat and sound insulation are also very good.

80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
Advantage
High performance weight ratio, good impact resistance
Resistance to many chemicals, almost no water absorption
Low flammability, self-extinguishing from fire
Suitable for a variety of composite molding methods: Vacuum infusion, spray up, hand lay-up, vacuum bagging
Good impact strength
Low resin absorption
Good sound & thermal insulation

Application:
marine, boat, surface transport, aerospace, and wind power industries

Specifications:
Item Standard Unit   P48 P60 P80 P100 P130 P200 P250
Density ISO 845 Kg/m3 Average 48 60 80 100 130 200 250
      Tolerance 43-55 -6,+9 ±10 ±10 ±15 ±20 ±30
Compression 
Strength
ASTM D1621 MPa Average 0.60 0.9 1.4 2.0 3.0 4.8 6.2
    Minimum (0.50) (0.7) (1.15) (1.65) (2.4) (4.2) (NA)
Compression Modulus ASTM D 1621 MPa Average 48 70 90 135 170 240 300
    Minimum (35) (60) (80) (115) (145) (200) (NA)
Tensile Strength ASTM D 1623 MPa Average 0.95 1.8 2.5 3.5 4.8 7.1 9.2
    Minimum (0.8) (1.5) (2.2) (2.5) (3.5) (6.3) (NA)
Tensile ASTM D 1623 MPa Average 35 75 95 130 175 250 320
Modulus     Minimum (28) (57) (85) (105) (135) (210) (NA)
Shear ASTM C 273 MPa Average 0.55 0.76 1.15 1.6 2.2 3.5 4.5
Strength     Minimum (0.50) (0.63) (0.95) (1.4) (1.9) (3.2) (NA)
Shear ASTM C 273 MPa Average 16 20 27 35 50 85 104
Modulus     Minimum (14) (16) (23) (28) (40) (75) (NA)
Shear
Elongation
ASTM C 273 % Average
Minimum
10
(8)
20
(10)
30
(15)
40
(25)
40
(30)
40
(30)
40
(NA)
  Width mm ±5 1270 1120 1010 940 840 740 700
Standard                    
Length mm ±5 2730 2350 2160 2040 1880 1600 1500
Size
                   
Thickness mm ±0.5 5~80 5~70 3~65 3~60 3~50 3~40 3~40
 

80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
Surface Treatment:
The selection of the appropriate post-processing technology will affect your product from all aspects such as the performance, cost and production efficiency. We have an advanced foam post-processing system and we will help you select the proper processing technologies such as cutting, grooving, perforation and so on.
Depending on different lamination processes and requirements of surface curvature, we provide 6 kinds of foam cores (as shown in the following) with optimizing the amount of glue absorption:
 
Scheme Type Description Molding Process
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion Flat Plate There is no other post-
processing. If you want curved surface, you can get it upon treating the flat plate by thermoforming.
Suitable for hand lay-up, compression molding and other processes of the flat plate with sandwich structure.
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion Scrim Foam Small squares are formed by cutting on one side of the flat plate in both directions of length and width with gluing fiberglass mesh on the other side. Suitable for products with curved surfaces.
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion Double Cuts Cut both sides of the core material to the extent 55-60% of the thickness and the cutting positions are staggered. The amount of resin absorption is much less than that of scrim foam. Suitable for the application with small curvature.
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
 
Perforated Plate Perforate holes with diameter of about 2 mm on plates. You can adjust the diameter of holes according to the thickness and density of the core material. Trapped air formed in the process of lamination can be removed from the bottom of the core material by perforating holes. Also, the resins can flow from one side of the core material to the other side. Suitable for hand lay-up, vacuum infusion, compression molding process to improve the adhesive strength.  
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion Slotted Plate Guide slots are set on the plate surface. Guide slots can be disposed in length or width direction on one side or both sides of the plate. The groove(s) can work as the flow path of resins and can remove the trapped air when using the resin vacuum infusion lamination process.  Suitable for vacuum infusion and compression molding process to produce products with large area. 
 80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion Slotted Perforated Plate 20mm. On the basis of slotted plates, perforate holes with a diameter of 2 mm in the slots that the spacing between every two is 20 mm in the length or the width direction of the plate.  It has features of the two above core materials, suitable for vacuum infusion, compression molding and vacuum bagging process to produce large-scale products.

 
The expandable curved surface here refers to the plane that can be expanded to become a curved surface. When using a hyperbolic plate or scrim plate, the deformation of foam core materials takes place by adhesion of the two sides.

Hand lay-up is a simple, effective process. The molding can be achieved by single-face mold or room temperature curable resin in this method. Reinforcing materials are generally in the form of chopped strand mat or directional fiber fabric such as woven roving. The processing steps are quite simple. But this method is only one face to have a smooth appearance. Besides, it is limited to the immeasurability of the member thickness, fiber content, porosity or apparent mass of the back side.

Compression molding is a method of molding using heat and pressure in a closed mold cavity. It is characterized by smooth sides and precise control of thickness, mass and fiber content. But the process should be performed with negative-positive mold, so that the process cost is relatively high.

Resin infusion is the process that one kind or more liquid resin is injected into the closed mold cavity by pressure. The required pressure in the mold cavity can be realized by vacuum (vacuum assisted impregnation), gravity or with the help of exhaust pump or pressure vessel. Generally, vacuum is provided to assist the injection of resin in the common vacuum assisted injection technique. The realization of it is via single-face mold with the other side covering vacuum bags.

 
 
          24 Hours Services          
80kg/M3 Double Cuts Rigid PVC Foam Core for Vacuum Infusion
Choose us, you will get the key of market!
Contact us, we will use the professional knowledge serve you!
Wish we can create the great future together!

 

About the Supplier

Watch Video
Watch Video
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD
QINGDAO HONTED BUILDING MATERIALS CO.,LTD

About Our Factory & Business Background

Address
No 510 Chongyang Road, Qingdao, Shandong, China
Terms of Payment
LC, T/T, PayPal, Western Union
International Commercial Terms(Incoterms)
FOB, CFR, CIF, EXW
Average Lead Time
Peak Season Lead Time: one month
Off Season Lead Time: within 15 workdays
Nearest Port
Qingdao, Shanghai, Lian Yungang

Our Production Capability & Technical Expertise

Main Products
Fiberglass Roving / Yarn, Fiberglass Fabric / High Silica Fabric, Fiberglass Chopped Strand Mat / Fiberglass Mat, Fiberglass Woven Roving, Fiberglass Tissue Veil / Pet Veil, Fiberglass Cloth / Glass Fiber Insulation, Fiberglass Mesh, Fiberglass Stitched Mat / Multiaxial Combo Mat, Natural Graphite Powder / Expandable Graphite, Chemicals / Fumed Silica / Sodium Methoxide

Our Industry Experience & Global Business Record

Export Year
2018-02-19
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe

FAQ

What is the water absorption rate of this PVC foam?
The water absorption rate is between 0.12% and 0.25%, ensuring excellent dimensional stability.
Can the density and dimensions be customized?
Yes, density can be customized from 48 to 250 kg/m3, and dimensions include 2160x1000mm and 1080x1000mm.
What thickness options are available?
Thickness can be customized from 3mm to 60mm depending on the specific application requirements.
Which molding processes is this foam suitable for?
It is suitable for vacuum infusion, spray up, hand lay-up, vacuum bagging, and compression molding.
What post-processing technologies are offered?
We offer cutting, grooving, perforation, and thermoforming to optimize resin absorption and surface curvature.
What are the main applications for this material?
It is ideal for marine, boat building, surface transport, aerospace, and wind power industries.
What is the lead time for orders?
Peak season lead time is one month, while off-season lead time is within 15 workdays.
What payment terms are accepted?
We accept LC, T/T, PayPal, and Western Union for international transactions.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now